5.93% of the factory (1/10 on-site work)
Workplaces are done at the factory, outdoor things are done indoors, construction simulations and site stakeouts are done by computer. 85% to 95% of the parts can be processed at the factory, which is about 60% less than the number of traditional construction sites.some products can be reused, materials can be recycled. In the future, In the future, more will be sent to the construction site, not the scattered steel, concrete, insulation board, but the pieces of wall panels, stairs and other "parts"; workers assemble these "parts" into a house in the cooperation of the machinery.
6.better insulation performance
The steel structure has light weight, high strength, good overall rigidity and strong deformation ability. The building's own weight is only one-fifth of the brick-concrete structure, which can withstand hurricanes of 70 meters per second, so that life and property can be effectively protected.
The thermal insulation material used is mainly made of glass wool, which has good thermal insulation effect. The insulation board of the outer wall effectively avoids the "cold bridge" phenomenon of the wall and achieves better insulation effect. The thermal resistance of R15 insulation cotton with a thickness of about 100mm can be equivalent to a brick wall of 1m thick.
7.1% of construction waste (green building)
Traditional buildings produce 200 kilograms of garbage per square meter, and a 50,000 square meter building emits about 10,000 tons of garbage. Construction waste accounts for 30%-50% of urban waste. Building materials transportation and construction dust accounts for 10-30% of urban air pollution, which consumes a lot of water and pollutes water sources. The building can be built in the factory manufacturing process, and the building is still fire-free, water-free, dust-free and tasteless. No welding, no cement, no gauze, construction waste is less than 1% of conventional buildings.